I have a 1989 CR 250 how much transmission oil do I need and where do you put the gearbox oil in
SOURCE: how much oil do i have to put
http://www.georgiaoffroad.com/dirtbike.php?model=94cr500&modelid=314
that web address will give u all of the specs. please mark my answer as a fixya! thanks.
SOURCE: Gear Box Oil Spec
Use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands of oil. Husky is a different breed. Today's bikes use the 10w40.
SOURCE: How much engine oil does a 94 HONDA CR 250 2
nearly evey bike has oil capacity on clutch cover near the oil filler, should say 1500cc or whatever. with a two stroke it's only gearbox oil so not much in yours probably a couple of pints, four strokes hols a lot more, always check level are filling and running for a few seconds, some oil galleries won't fill just by pouring in at the filler. you should have a dip stick or an oil level screw in the casing.
SOURCE: how much oil in the gear box of a 2002 cr125 (also % on gas mix
IF you are no riding bike on the trak an not clutching it much i would use a mix ov 40-1[120ml-5L] if on trck an making engine work hard then use 32-1. OIL-if you look to the left of the oil inlet benerth the water pump there is a nut undo it and when the oil stops flowing out then thats what u need in so try and judge it.
2,064 views
Usually answered in minutes!
×