Cdi 125cc - DT 125 X Yamaha Motorcycles

Can
an
y
help me with this brand quad any manuals or info I need plastics and seat ect 110cc

Broken or disconnected wiring.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Stator will stop the cdi from firing the spark plug and either cdi or stator if bad will stop a spark from being created. The coil, wiring, kill switch and other things can also stop ignition spark.

you need a bit more lead
quick get you out of trouble gadget
get a lead pencil and go over all the electrical connections
including your spark plug
then check your cdi, cdi pick up, coil, lead and spark plug
the coil lead may need cutting back about 10mm

Tryd go to auto shop and check the carburator of your motor and clean your air filter adjust air setting in carburator and put a new fuel pump check fuel setting in carburator

If the one you bought is too big you need to get a 17mm centre one. 17t is the teeth and the next important bit is the pitch.

either 420 or 428. You can check by measuring how thick your sprocket is at its widest point, 6mm is 420 7mm is 428 :)

A CDI is the BRAIN BOX, all you have to do is Un plug it, Unbolt it and install the new Box

stater, cdi,ignition coil

I am looking for Yamaha Enticer 125cc CDI Socket.

hi alex its your cdi mate that why your get a hot start but not a cold one.i have a derbi cafe 125cc bike as well got the same problem but l a new cdi an its all gd now .all best mate