2003 Harley Davidson XLH 883 Sportster Logo
Posted on Jun 01, 2011

I have a 2000 Harley 883 Sportster. When it gets hot, it shuts off. I have replaced the coil pack thinking that was my problem only to find its still shutting off on me when it gets hot. Any suggestions?

4 Related Answers

Anonymous

  • 13 Answers
  • Posted on Mar 15, 2009

SOURCE: I have Harley Davidson 2000 Sportster 883. I

Your key switch could be bad or you have a broken power wire from the battery to the circuit breakers. Check everything with a voltmeter.

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 13, 2009

SOURCE: Throttle to engine problem on 1993 Harley 883 Sportster

 You either need to lube the cables, or adjust them. You adjust the throttle to have a 16th to an 8th inch of freeplay with the bars like youre riding straight. You adjust the snap back with the bars fully to the right. As far as the motor shutting off , you need to use the enrichner ( they call it a choke) until it will idle on its own without rapping the throttle.  Also , your idle may be set too low on the carb. The adjustment is made at the idle speed screw , right behind the air cleaner. 

Anonymous

  • 1 Answer
  • Posted on Jan 27, 2010

SOURCE: 2000 Harley Davidson XLC Sportster 883 won't start

the heat from the bulb being continiuosly on may have melted a wire inside your headlight?

Anonymous

  • 623 Answers
  • Posted on May 19, 2010

SOURCE: 2000 XL 1200 S Sportster Sport: 2003 Harley 883 Sportster Hugger sat for a year. D...

Remove the carb soak in carb cleaner, **** out small bleed holes with a wire from a wire brush etc. One of the passageways is still clogged, or the float is sticking.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Sportster 883 problems

What are the problems and whay are the symptoms????
0helpful
2answers

2000 XL 1200 S Sportster Sport: 2003 Harley 883 Sportster Hugger sat for a year. D...

Remove the carb soak in carb cleaner, **** out small bleed holes with a wire from a wire brush etc. One of the passageways is still clogged, or the float is sticking.
1helpful
2answers
Not finding what you are looking for?

357 views

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...