If you have two wires that go to the turn signal and they don't work one way. You could try them switched around.
This is for a turn signal that is NOT also a running light. (Yellow Lens to Rear)
Use a test light and turn on the turn signal test both wires with the test light clipped to the ground or chassis of the bike. The wire that causes the light to blink will be the positive or hot side. That wire should attach to the bottom of the bulb.
The other wire is the Ground or common and that should attach to the side of the bulb holder.
Testimonial: "Thank you, as this seems logical. I will give it a try."
1,080 views
Usually answered in minutes!
×