SOURCE: yamaha r125
Just remove the chain cover then bend the tab on the lockwasher away from the nut so you can then remove the nut. Install the new sprocket and put the assembly back together. Stock gearing is a 13 tooth front sprocket and 48 tooth rear sprocket. The stock chain is 112 links plus master link. The chain is DID 520D 112L. Please rate my answer. Thanks.
SOURCE: general info
Yamaha R125 might be launched by 2008 end.It will showcase some of the most advanced tech in probiking like the deltabox frame,Fuel injection,monoshocks,hemi combustion chamber forged pistons that can resist high temperature and a lot more.
SOURCE: bike wont start engine management light flashing
do you start the engine with the side stand down?
this will cause engine to cut out.
453 views
Usually answered in minutes!
×