3M Polygun AE II Hot Melt Glue Gun "insert" Questions

Ad

Question about Craftsman Crafts & Hobbies

1 Answer

...wooden bracket to dry wall. The original hole has pulled out. Which glue stick do I use, and can I insert the screw before the glue is set. The screw is about a inch long. i would let the glue set ...

Ad

Question about 3M Crafts & Hobbies

1 Answer

how do i insert glue stick in to my emhardt electric glue gun Insert the glue stick into the back of the gun. After doing this plug in the gun and allow it to heat up. When the gun reaches the correct

Ad

Question about Rubbermaid Crafts & Hobbies

1 Answer

I have a rubbermaid glue-gun. I'd like to know how to insert a new glue stick. I tried and it doesn't seem to 'click-in' properly. im not sure what model rubbermaid glue gun you have, for most there ...

Question about Crafts & Hobbies

1 Answer

Glue doesn't advance I inserted the glue into the glue gun and it worked for a little while. However, soon after, I clicked and clicked the trigger, but the glue doesn't seem to advance. What is wrong

...work) Heat the glue gun,unplug it,and then heat the end of the paper clip with a lighter/candle. Insert it into the end that you load from,sticking it into the glue stick. Wait a short time and ...

...a Stanley GR100 glue gun I do not believe there is a manual. there are instructions on the package. Insert the glue stick and turn on the gun. When the glue melts and the trigger moves glue will come ...

Question about 3M Crafts & Hobbies

1 Answer

Glue Gun Troubleshooting How Should i Use Sealing Wax with a Glue Gun? 1. Insert your wax stick into a standard sized glue gun. The fit may be tight. The more wax you use, the smoother the fit. 2. Use

...there was no Instructions The gun is blue and orange 15 W 110v.240v TG-03M Pretty basic to use. Insert glue stick from the rear, push it as far as it will go without forcing it, if there is room ...

Question about Crafts & Hobbies

1 Answer

How to use it Insert the glue stick. Use a small dish to place the glue gun in, so you don't burn the table. Plug it into an outlet. Do not touch the tip, it will get very hot! Once it gets hot, you ...

Question about Surebonder Crafts & Hobbies

1 Answer

spring has come loose Spring goes on the white hook closest to the edge of the gun and is attached to the blue vertical post (along the edge of the gun) about an inch to the left of the hook. When the

Not finding what you are looking for?
3M Polygun AE II Hot Melt Glue Gun Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top 3M Crafts & Hobbies Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Carolyn Rogers

Level 2 Expert

159 Answers

Are you a 3M Craft and Hobby Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...