KitchenAid KSM150PS Artisan Series Stand Mixer "attachment wont turn" Questions

...wont turn. Is there a reset button or a way to fix this? It sounds like you burnt the motor out or shorted the speed control. replace the nylon cog. The same happened to me - must be a design

attachment for grinding meat on the front wont work ? mixing arm in bowl works fine ! why wont it engage? Firstly I would check it is fully engaged. If it is, remove the food grinder and look into the

...wont start My unit started dying down while i was using an attachment. I removed both side springs to check if the brushes was worn out, It was still long ( 1 inch) i reinstall it and now the unit ...

...turn on again. I've taken the cover off and I can see that the PCB is showing scorch marks. I have found that it is fairly easy to buy a new board and I can replace it but I'm wondering if I'm better ...

...turn gives off the humming noise because it is out of center or balance) if you notice that the clattering gets louder or softer by pushing down or pulling up you have to play with it to find the ...

...wont my classic kitchenaid mixer switch off when mixing my kitchenaid goes from switch off and jumps back on at speed 1why Good Morning, There is a spring inside your mixer attached to the speed ...

...wont run,,Help!!!!! its 3 days to christmas and i need my Kitchen aid !! 'Thanks Jim Jim, hi- um, you're reading this with your son, right? Inspect the brushes carefully, be sure that the little ...

...wont turn. Is there a reset button or a way to fix this? It starts and beaters rotate but the motor sounds wrong and it smells differentl. You will have to have the transmission serviced. sounds like ...

My paddle attachment wont come off. I cant push up to turn and remove it, Wha do I do? You have solved this one already.

...wont run anymore or it smokes or it won't run at all. over voltage can short out the armature the stator or the phase control board. It can also short out any of the wires attached to the speed ...