KitchenAid KSM150PS Artisan Series Stand Mixer "bowl turning" Questions

...bowl when in lifted position by turning screw (A) clockwise to raise the bowl and counterclockwise to lower the bowl. Just a slight turn is all that is required: the screw will not rotate more than ...

...bowl clearance by turning out the adjusting screw. Place your bowl on the bowl screw cap, Place the flat beater on the agitator shaft and lower the head of the mixer so the beater is at the bottom of ...

Bowl lift on H660T will not raise bowl. The pinion gear turns the threaded rod, however; the screw just turns in the threaded block on the bowl yolk, without raising the bowl The brass nut threads are

Can't get the screw adjustment to change the height of the bowl My stand mixer is not the tilt model, rather there is a handle on the side that raises or lowers the bowl. The problem is that the ...

...bowl. Turning the screw on my mixer clockwise actually makes the beater hit the bowl harder. I'm baffled. However, the Service Manual can be found at: ...

bowl too low The bowl is adjusted too low, or the beater shaft is too high. The beaters and whisk don't come close to the bottom of the bowl - probably about 1/2 to 1" space from bottom of beater to ...

why does my sunbean mixmaster bowl don't spin? the spinning plate under the bowl does not have any power to spin the bowl; it only aks as a "lazy susan" carousel that allows the bowl to turn from the ...

Turning them to the right will raise the arms slightly and to the left should lower it. The best way to test bowl height is to put your flat beater on the mixer with the bowl, put a dime in the bottom

...bowl screw. If you screw the beater to the bowl then it cannot turn without also turning the bowl. Here's a link to an exploded view ...