KitchenAid KSM150PS Artisan Series Stand Mixer "tilts down" Questions

Sunbeam stand mixer won't tilt back down I was using the mixer at Thanksgiving this year to make pies and pressed the tilt release button to tilt it back which worked just fine. But now it&#39

The tilt button is not working After mixing some cookie dough, the tilt button will not allow the arm to move up to remove the bowl and beaters. What can I do? When the button is pushed, the arm is ...

Motor head will not tilt back I have a Sunbeam Mixmaster Heritage series, model 2349. The button to tilt the head back will not release the tilt mechanism. It pushes in but the head will not tilt back

Mixer won't tilt back The mixer, while about 5 years old, has not been used often. The mixer head is in the down and locked position, and the tilt lock handle won't move either way to unlock it, so it

...down position, it tilts too far and the whisk mashes against the bowl so much that the spring becomes completely compressed. It is not usable. OK,Where the mixer pivots there is an ajustment screw ( ...

Stand jumps My mixer head is jumping up and down while mixing it has even worn the white off the beater. while off you can actually have the mixer locked and you can move the head up and down in ...

Hamilton Beach 7 Speed Stand Mixer Model 63390. The tilt button is not working anymore. Has to be moved up and down manually. Was making a cake for Thanksgiving and all of a sudden, the button to ...

kitchen aid tilthead mixer will not lock down with bowl and beater in place, i can't lock the mixer head down, as required to set beater speed. this tilt-head models' motor head locking levershifts ...

lock tilt head My tilt button is stuck on and it will not latch. I tried to pry the button out with a knife but it still won't work. head moves up and down just will not lock. reset button will not ...

How to put the steel pin back in so the head will tilt without falling down Tip it upside down on a towel. Look deep inside the pedestal where the hinge pin goes through. Right in the middle there is ...