KitchenAid KSM150PS Artisan Series Stand Mixer "uses speed" Questions

My Mix3 4004 Krups hand mixer stopped working a long time ago. I replaced the capacitors...but now I don't know where to start checking Krups produce a premium product and it would be surprising if ...

...uses a phase control board a speed control plate and a governor for speed control. the governor rarely goes out the phase control board is a likely culprit but the system would ...

Kitchenaid stand mixer KSM90EM turns off when going to the left on speeds 4 - 6. Makes a bit of noise at stir speed, but runs in time. Also noticed white dust powder in small amounts on the speed ...

My classic KA mixer will not start on speed position one or two. It will start if I move the the speed knob to 3 or 4. I then can use any speed. This isn't normally a problem unless I forget and ...

My wife's Kitchen Aid Artisan 325W mixer has no high end speed. I tried a new set of brushes with no change. Then starting on speed 1 to 2 and from 2 to 4 you get a nice speed increase the speed ...

My K5A 300watt Kitchenaid mixer only goes one speed (as fast as possible) no matter what speed setting it is on. It also sometimes turns on by itself when it is plugged in but the switch is in the off

The latch/switch on the speed control board is stuck The switch on the phase control board/speed control board on my KitchenAid Classic Stand Mixer (max watt 250) is stuck on the "10" speed and it ...

kitchenaid speed controller (don,t work You need to adjust the mixer speeds. Obtain a copy of the KSM150PS Repair Part List from Kitchenaid.com. Remove the screw holding the End Cover and locate the ...

I bought the mixer used without hearing it run. When I turn it on the lower speeds I hear a buzzing sound. It's not in the mechanical gears it sounds more electrical to me. I have replaced the ...

My mixer will only work on high speed why Speed controllers reduce the power provided to the mixer motor and have to "soak up" some of the power not used. If the mixer was used on low speed but heavy ...