...door (missing) the grinder motor (froze up) Did this without trouble shooting and guessing Now with trouble shooting the motor I have 2-4 volts d.c. across any of the 4 wires. I can not get the ...
...door. clean the condenser coils at the back and make sure the condenser fan by compressor is running if is not running you mightg need to call a tech to trouble shoot it or if you want repl both the ...
Question about Frigidaire Refrigerators
...GOOD REFRIGERATOR WILL NOT GET COLD ifit is a single compressor model, then the door between the freezer and the fridge side may be stuck shut,, usually located in upper left hand corner of ...
...refrigerator does not. The touch pad buttons are active but the refrig still will not work. Freezer is ice cold Here is a link to a trouble shooting guide for three models similar to your download or ...
...Refrigerator model LFX25950SB Front door panel reads Er 1F and that is all that it will display it means that the motor fan inside freezer the sends air to the ice maker is not communicating with ...
...trouble shooting steps for this situation. When I volt out the light and shut the light off at the front panel I still get 120 volts. I pull the connector on the light and I get 120 volts on the y/b ...
...refrigerator door gaskets on internet but could not find freezer gaskets. You can get your parts here, Fast and at a low cost. http://www.myapplianceparts.com/ this place will help you trouble shoot ...
...them. if they dont have, then they may be using a magnetic door switch which would be very hard to locate and trouble shoot. Its the board!...see class action suit against LG for this exact ...
...could anyone help me trouble shoot it? thanks a lot. Cesar if you have a water filtering system for your sink that also filters the refrigerator, then try removing the filter from the
307 questions posted
Usually answered in minutes!
1,239 Questions
824 Questions
623 Questions
625 Questions
