...brake system if abs light on from accident possible wire sensor damage ..... but ......inspect and test brake system for proper working order and no leaks or damaged lines when abs fails it defaults ...
...ABS module. Honda had two brake reservoirs one on the normal brake master cylinder the other on the ABS module. If abs fuse has no power the module has no power. that power comes from the main fuses ...
...ABS, and Brake lights stay on. Sometimes the Brake light will go out but sometimes it will stay on. The SRS and ABS lights are always on. The car seems to be driving okay. brake light could be a ...
...brake is locking and causes the brakes to pulse stopping the car and not letting it skid --when abs fails u still have braking but if u hit pedal hard car will skid --------as to ur problem check the ...
...abs tone ring is part of axle shaft some rock may have damaged teeth of ring . Try to disconnect the plug on your brake master cylinder. Start you car and see if the light turns off. If they do then ...
abs system, which causes the abs light to come on and then go off, as you say. It won't affect your brakes, just your anti-lock braking function. if that light is on. If it remains on, have it checked
...ABS light on and am trying to find out if place a piece of wire between the connection after taking the sensor off if this will make the light go off? If your ABS (ALB) light is coming on, that ...
Honda 1996 abs light stays on, what is the most common cause? all four brakes have been replaced The ABS pump. Replacing pads and shoes should not affect ABS.
Causes: bad brakes, bad or dirty wheel sensors. or damaged by road junk hitting them, you have 2 choices (besides wild guessing) take it to any ASE (USA) certified mechanic. or DIY ??? read the manual
248 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
