Kenmore Front Load Washer "he2t start" Questions

...start my Kenmore HE2t washer there is every time I start my Kenmore HE2t front load washer there is a very powerful smell of mold. I can't find the manual but I suspect there is a filter that needs ...

HE2t has a Code 3H. Door is locked with load inside Unplug or turn the circuit breaker off for 2 mins. Repower the unit. Press the Pause/Cancel/Stop button twice to clear the code. Start a short cycle

HE2t washer, when the start button is pushed? There is likely a short on the ECU and it must be replaced. Further testing should be conducted by a professional in this case. Thanks for using FixYa - a

Kenmore he2t F25 error. Trying to ohm test the MCU. Are you supposed to stick the leads of the multimeter into the holes of the white connector where the wires go in, or to the wires themselves? ...

...HE2t Front load washer Type 832. I am getting a code of F-24, when I try to start the cylce. What is the problem that prompts a F-24? HelloF-24 is a water temp snsor error.Try running the machine in ...

...he2t washer, I am getting the F21 error code and it will not drain, I have read the answers about checking/cleaning the pump. when I try to start it the add a garment light will come on, the tub will ...

washer not fully draining my new kenmore HE2T started leaving water in tub at the end of the cycle? water level sensor is faulty

...he2t kenmore front load washing machine won't power on and there's a clicking noise when the machine is plugged in I hear a clicking noise, but when I push the power button I see 3H but nothing ...

Kenmore HE2T front loading washer. Will not start cycle... hums, and then turns off. no error codes given. unplugged and restarted. make sure the water is turned on to the unit.

...he2t washer that will not start. Door locks, buzzes for a minute then shuts off. No error codes. What could the problem be? Checking water intake , cleaning drain hose , unplugged power then plugged ...