When the machine goes into spin cycle there is excessive vibration as if something was loose in the drum. Other wise the machine cycles fine. Is there someway to check for bolts or nuts loose on the ...
Something catching on drum It only started today, when the drum moves round something is catching and maxing a clicking noise. I've examined inside the drum with a torch an can't see anything stuck in
drum wont turn and belt disconnected. how to rebelt. you need to remove the front, place new belt around drum and then over pulley.belt should be tight against drum hold drum with out getting cut and ...
drum clicking when the drum rotates clicks bad Something small like nail , Bobby pin , more than likely it will be too big to fall all the way through the drum but you need to find it before it causes
Question about Kenmore HE2 Washing Machines
How do you remove the washer drum to get a screw out? A screw is loose in the washer under the washer drum So I would like to know how to remove the washer drum your not going to be able to reomveth ...
...Pull the unit out and unplug it. Open the back panel of the unit to access the back of the drum. You should find a counter weight on the top of the drum (a quarter round cinderblock) which ...
...but adjusting that made no difference. It goes wild with just one towel in it. the top rim of your drum is filled with a fluid to balance the drum, the fluid probably leaked out, if so the drum
rock stuck between drum and housing A small rock is stuck between the rotating drum and the housing so the drum catches and sticks. It fit into the space, but is too big to extract. I bet its a real ...
...in clothes HE2 washing machines puts small holes in our shirts Inspect the rubber seal, and steel drum to make sure there is no foreign object sticking out, which could be tearing holes in your ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions