Kenmore HE2 Plus Front Load Washer "lights flashing" Questions

washer will not run performed diagnostic test by pressing button 4 seconds on/off. Lights flash but no error codes are displayed. door remains locked at all times(used manual release). After lights ...

Lights flashing during cycle All the lights flash on the front of the machine during the cycle its not the same place each time. There is no error code. After it gets done flashing it tries to resume ...

...lights flashing. Essentially, the machine does not cycle correctly. ok, sounds like you should be seeing an error code flashing in the display with the lights. this will be an F followed by a number. ...

flashing prewash and add garment lights My HE2 Plus will fill with water, but when the tub reaches 1/2 full, it drains, and the pre wash/add garment lights keep blinking. When the tub is drained, the ...

lights are flashing again. Same thing happens when I manually turn the dial to drain/spin. I am hoping there is an easy inexpensive fix to this. I called Kenmore service, and they were no help at all.

Codes SD and F1 When I tried to wash a load of cloths ealier it stopped, and flashes a code f-1 and all the other light blink (express wash, normal, rinse/spin, etc.) My wife said it flashed a SD code

...lights went out and the "clean washer" light started flashing. I tried running a load and it all seemed normal, but then nothing happened when I pressed start. Any ideas what to try next? Sounds like ...

...test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? Thanks! it sounds like u fixed the problem. have u tried a load of clothing ...

...and clothes clean stay lit but all the lights on the knob are flashing. We can hit stop and then put the dial to drain and spin and it will do it, it's just not washing. pcb problem or door ...

...lights are flashing and unit won't start up. My washer was leaking and now it won't start the cycle but all the lights are flashing, and I think that means an electrical problem, from what the manual ...