Question about Kenmore HE2 Washing Machines
...Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks for using ...
...Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks for using ...
Question about Kenmore HE2 Washing Machines
...Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks for using ...
Question about Kenmore HE2 Washing Machines
...Door Switch Assembly defective Wire Harness from Central Control Unit to the Door Latch or Switch Assembly broken Central Control Unit (CCU) Door Lock or Switch temporary failure (it can be reset ...
...an automatic test mode that tests all componets. The first thing it will test is the door lock. If this fails you more than likley have a door switch problem. Let me know how you make out. ...
...door. 3. Unplug washer or disconnect power. 4. Verify wire harness connections to inlet valves, pressure switch, drain pump and Central Control Unit (CCU). 5. Check all hoses for possible leaks. 6. ...
Question about Kenmore HE2 Washing Machines
...door release. Now as far as no power to panel there are two solutions one is to plug unit in listen for a light click to see if ccu is getting power if there is a click then ccu is good if no click ...
Question about Kenmore HE2 Washing Machines
...test door switch. Removed control panel at front top of machine. Three screws under soap dispenser and then pried it upwards. Removed J2 2-wire plug from control board. No continuity between 2 wires ...
...door. 1) test the power cord for open 2) test the outlet box, see for blown fuse or c.breaker put some desk lamp and see if work 3) test inside of the control board if there fuse blown or ...
door switch error. That means that there is either a faulty door lock or a bad connector to the control board. First try tripping power or disconnecting the appliance for ten minutes. If that does not
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions