...diagnostic test & bypassing service did history mode &diagnosti test also did manuel diagnostic test If these tests do not reset it is possible that the program controller processor is a ...
Question about Kenmore HE2 Washing Machines
...diagnostic test? Replaced broken water pump. I followed the manual to run diagnostic test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? ...
Question about Kenmore HE2 Washing Machines
washing machine is getting stuck on the rinse cycle. There is no error code coming up, just all of the light blink with the exception of wash and spin. I have unplugged it overnight and it didn't help
...diagnostic test work? I replace a broken water pump. I tried to run the diagnostic test, but I don't think it worked. All the panel lights lit up, but then nothing happened. All the lights went out ...
Question about Kenmore HE2 Washing Machines
...Diagnostic Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks ...
...machine Hi, Make the following check: 1. Unplug washer or disconnect power. 2. Check wire harness connections. 3. Check drain pump. 4. Check drain pump motor. 5. Check that the drain hose and drain ...
...Diagnostic Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks ...
Question about Kenmore HE2 Washing Machines
...Diagnostic Test or any cycle. -Door switch open while door is locked. 1. Push the door and check if it is completely closed. 2. Verify CCU operation by running a Diagnostic Test or any cycle. Thanks ...
...diagnostic test by pressing button 4 seconds on/off. Lights flash but no error codes are displayed. door remains locked at all times(used manual release). After lights flash, door locks but nothing ...
...you can remove the bottom front panel. Taped on the inside of that panel is a book with an explanation to all your codes and how to put washer into self diagnostic test. Good luck hope it
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions