Question about Kenmore HE2 Washing Machines
...do a half spin and the door lock will come on while the add a garment light is still on. In addition to the pump problem is the door latch also damaged? I think it means something is stuck in the ...
...machine will run a cycle to remove the excessive suds before completing the wash cycle.once you remove the lower panel you will see the pump it has a round cap that can be rotated counter clock wise ...
...washing machine...it stops mid load and flashes F20 Something is in your pump trap, easy fix. pop open the bottom panel by removing the three screws under it. requires a torx bit or a nut driver. if ...
Question about Kenmore HE2 Washing Machines
...Add a Garment, Wash, Spin, and Clothes Clean lights lit. What does this error mean ? It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to ...
Question about Kenmore HE2 Washing Machines
...machine. In diagnostic stuck on drain & spin then finally went to same three error lights. Says something about pressure pump? where is it? That is our best guess. Checked water in and out all ...
Add a garment light is on. I followed the troubleshooting suggestions in booklet, but nothing is working. It appears your timer/main controller/CCU has failed in this instance. For replacement parts -
Question about Kenmore HE2 Washing Machines
...stuck on F01 error message and Add Garment light on. Any trouble shooting suggestions? The F01 error is a communication error and most likely the cause is a bad central control board. You tried to ...
Question about Samsung Washing Machines
my samsung washer is stuck in wash cycle. it adds water then move a little and then keeps repeating the same. How To Repair Washing Machine Stuck On One Cycle
Question about Kenmore HE2 Washing Machines
...washing to add another item. Now it is stuck and the time is still blinking and nothing will reset it including the reset and start button. Help. I would unplug the unit. Then plug it back in, let it ...
...machine to add an item. There is water in the machine and I cannot restart and I cannot cancel the cycle. What should I do? first of all you don't have to paused the machine as it is on spin it get ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions