Question about Kenmore HE2 Washing Machines
...leak during fill. The leaking water will drip down the outside of the tub and collect under the unit. Be sure that the hose connected to the inlet nozzle is tightly clamped. Replace the nozzle if you ...
Question about Kenmore HE2 Washing Machines
...leak during fill. The leaking water will drip down the outside of the tub and collect under the unit. Be sure that the hose connected to the inlet nozzle is tightly clamped. Replace the nozzle if you ...
Question about Kenmore HE2 Washing Machines
...water comes out of the soap dispenser and in to the main compartment. Pulled it out with a needle nose plier and good to go. Thanks to everyone for their input here. Hello,remove the panel on bottom ...
Question about Kenmore HE2 Washing Machines
Washer is leaking. If facing washer, water is on Washer is leaking. If facing washer, water is on floor on left side and back, none on right side. It is hooked up on left side. It seems to be coming ...
Question about Kenmore HE2 Washing Machines
...water leak was coming from the hose on the top of the drum. He "crazied glued" the lip of the rubber hose to the outside of the drum and let it sit for 20 minutes............. and no more leaks. This ...
water leak while doing a load, there is enough water on the floor after to do another load, where is it leaking? it is probably coming out of the hose that goes into the pipe behind your washer.
Question about Kenmore HE2 Washing Machines
My frontload HE4 washer is leaking from the water dispnser into the drum when not in use. I had pitched four or five towels in the washer last night to be laundered this morning (left the door open ...
Question about Kenmore HE2 Washing Machines
Water leaking at time the washer is being filled, not during wash cycle. Leak appears to be starting a bottom left side of the machine toward the front from the middle of the side. Observation does ...
...water to leak out. If there are none, check for any floating devices which serve as fill sensor that my need refitting or may be loose. If your unit has a pump for the water, observe it while rinsing ...
Question about Kenmore HE2 Washing Machines
leak? Or, do you have water slowly draining from the tub? Double check your drain line to be sure. Next, check the drain pump to ensure it is not clogged or obstructed which minimizes drain flow. Also
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions