Dmm Vision Fitness T9500 Treadmill "board" Questions

Ad

Question about NordicTrack Exercise & Fitness

1 Answer

...your display use batteries ,replace by new ones.2)tight the flexible cord from keypanel vs display board3)tight the display board vs lower board( main motor board)4)see if your have 5VDC to display ...

Ad

...aprox.2) With this you will fix it.3) However if the problem persist, you must check if the display board is o.k or faulty. 4) Test the 5VDC for IC( Including EPROM, ROM,etc) Tight flexible cable for ...

Ad

...error occurs with no belt movement, the causes for the LS or L5 error are:A) Faulty upper display board or faulty relay board B) Improper speed control wiring C) Improper motor control wiring D) ...

Question about Horizon Fitness Exercise & Fitness

2 Answers

connecting the motor control board I purchased a new motor control board but it didn't come with instructions on how to hook it up.. Dear Su:Please contact your supplier , for to ask the ...

...You must Test or measure the voltage for +5vdc to I.C.( EPROM, ROM, etc) , coming up from the Lower Board( Main Controller Motor Board).Re-connect the flexible cord between Upper Board(Display) VS. ...

...SISTEM HAS BATTERIES EXCHANGE BY NEW ONES.3)TIGHT THE FLEXIBLE CABLE FROM THE KEYPANEL VS DISPLAY BOARD AND THEN TIGHT THE CONNECTOR FROM THE DISPLAY BOARD VS LOWER BOARD OR MAIN MOTOR CONTROLLER ...

Question about Exercise & Fitness

1 Answer

...parallel to the flywheel. Is it out of position? Unplug 3 wire speed sensor connector from relay board. Check for pushed pins or loose wires. Any found? Unplug 12 wire upper harness connector from ...

Question about HEALTHRIDER Exercise & Fitness

1 Answer

...BY 5 SECONDS.3) IF THE PROBLEM PERSIST, TRY TO TIGHT THE FLEXIBLE CORD FROM KEY PANEL VS DISPLAY BOARD.4)TIGHT THE DISPLAY BOARD VS LOWE BOARD(MAIN MOTOR BOARD)5) IF THE PROBLEM PERSIST THE MAIN ...

Question about Bowflex Exercise & Fitness

1 Answer

...up, the red light on the power switch lights up and the green led and red led on the controler board are lit. A/C voltage to board is 120 volts. Never get any D/C output voltage from board to ...

Question about Exercise & Fitness

1 Answer

trimline treadmill repair 7600.1 no power The treadmill stopped and the upper board was on. I shut it off and tried to restart it and it appears to be dead. No lights on control board or upper board. ...

Not finding what you are looking for?
Dmm Vision Fitness T9500 Treadmill Logo

111 questions posted

Ask a Question

Usually answered in minutes!

Top Dmm Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Tom Chichester

Level 3 Expert

55370 Answers

ray gallant

Level 3 Expert

66184 Answers

Are you a Dmm Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...