Question about Life Fitness Exercise & Fitness
goes back and forth from pause to resume I have a Life Fitness 95xi. Today I was using it set on level 8 (quick start) warming up. At the 10 minute mark I adjusted up to level 12. As soon as I started
...it goes faster than someone can run butthe speedo never changes Please Run the software calibration for easy diagnostic and fix it. go under the HOOD covert Motor, and follow the steps God bless ...
goes faster 1) you must lube the deck belt+ and rollers bearing.2) you must change the deck by worn, this happen and the Noise can be a GOOD reason for to that.3) test the bearing motor, and replace4)
...goes faster that set speed on incline When on incline, say 16+, if the speed is set for 2 and I go down to 1, the there is no difference in the speed. At higher incline levels 28 plus, the treadmill ...
Question about Weslo Exercise & Fitness
goes working slowly and fast. Not Constant. What is defect or wrong? When i'm standing on the walking place, it does'nt rolling or working. If you wish to get some details; check the site linked here.
...faster it goes now. Elevation controls work fine and everything else functions. first thing to do is to enter the calibration mode. First remove and replace the safety key. Press and hold the ...
Question about Nordic Track Exercise & Fitness
faster it goes the louder it gets. At higher speeds it sounds like it is going to explode. Any ideas? Is it the motor? I actually works fine, but it is so loud we can't hear anything while working out
Question about Exercise & Fitness
goes faster and faster and the only thing that stops it is when i pull the safety key...does anyone know how to fix this problem...Cheers yes RUN THE software calibration inmediately for easy diagnose
Question about Treadmill Doctor Exercise & Fitness
get louder the faster it goes. Sounds like it is coming from the motor, not the bearings. Suggestions? Either the drive belt is damaged or the belt is out of alignment due to worn motor shaft bearings
111 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: