Question about Exercise & Fitness
...error codes untill you've reached "L er". The push start to erase the message. Turn the power off and then on again to restart the treadmill. With any luck the error has disappeared and the treadmill ...
...error message on screen just the normal scrolling messages. Safety magnet is in place. I have removed and replaced magnet and hear the machine click on and off accordingly. I have tried powering down ...
Question about Quinton Exercise & Fitness
the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button
...worse. I then tightened this several turns until the knocking sound was jreduced or essentially erased. I then hopped back on the tread mill and my weight 210 lbs, i was able to go at a 3.5 pace ...
...through to the electronics board. (This hole should not have a screw in it.) Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).
...console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset
the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button
17 questions posted
Usually answered in minutes!
188 Questions
112 Questions
99 Questions
96 Questions
64 Questions