...two cables that need to be replaced on my machine (nautilus treadclimber 5000) one is the I/O cable 8 Pin 75", Rt. Upright and the other is I/O Cable 8 Pin 42" Upright MCB. How and where do ...
trotter by cybex model 900t code 8 error Error 8, is a power fault error. This means the drive motor voltage dropped below 190 VDC for 5 seconds. This could be caused by worn motor brushes or the ...
Question about Horizon Exercise & Fitness
Where can I find an owner's manual for a model 821T? here is info to help track that down. Out-of-warranty Horizon and Vision: 888.993.3199 M-Th 8:00 a.m. - 7:00 p.m. CST F 8:00 a.m. - 5:00 p.m. CST ...
tx 5.0 rc treadmill by sportscraft, manual the treadmill stops after 8 seconds and all power shuts off. when you disconnect the safty button, and put it back, you can start it again, but again in 8 ...
Question about Spirit Exercise & Fitness
Espirit ET-8 treadmill powers up but START button doesn't start treadmill my treadmill powers up, but when I press the START button, nothing happens. i press different settings, and those buttons ...
Question about Nordic Track Exercise & Fitness
...to nordic track c2500 Locate the Reed Switch (10) and the Magnet (7) onthe left side of the Pulley (8). Turn the Pulley until theMagnet is aligned with the Reed Switch. Make surethat the gap between ...
Free Spirit Treadmill 8 - 9 yrs. old. 6hp motor. Was working fine last time used. Went to use it & #70 was on display when powered up. Speed does not match displayed speed. Used to top out at 11.5
DC-8 error code on a Life Span Tr1200i I'm getting a dc 8 code while running. Then it stops. What's causing this? IF YOUR WEIGHT IS MORE THAN 100KG YOU MUST LUBRICATE RUNNING BELT OR NOT YOU MUST ...
Question about Exercise & Fitness
On power up the treadmills slowest speed is 8 klm's/hr, it can be increased to over 16 klm's/hr, but then only lowered to 8 klm's, which is to fast and dangerous to step straight onto. Is ...
Please help! Just set up my TR1220i and I'm getting Error Code 8? Help!!!! power fault with error 8. motor controller failure . Test for output voltage for to input voltage motor, If there are NOT the
158 questions posted
Usually answered in minutes!
188 Questions
99 Questions
96 Questions
64 Questions
80 Questions