Question about Sportcraft Exercise & Fitness
...move the belt to the right. Also, there are two adjustment holes one on top and bottom. Which one do I use? belts always move to the highest or tightest point . to adjust move one adjusting screw ...
...move very slowly. The belt seems tight enough, tried to tighten 1/4 turn, still not moving properly. Treadmill is a Weslo Cadence 450, bought a few years ago. Thanks lift the sides of the w/belt the ...
Question about NordicTrack Exercise & Fitness
belt will move for just a moment then it stops. My wife stepped on the treadmill and pressed start like normal. the console showed that it should be running at 1.0mph but the belt/track was not moving
Question about Nordic Track Exercise & Fitness
...move the belt back to the center of the walking pad. PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt has shifted to the left, Start unit @ 1.0 mph ...
Question about New Balance Exercise & Fitness
...move. Belt is on and can manually move 1) LUBE the deck belt,you have a WORN deck belt, this happen because you didnot lube according with the schedule maintenance 29 LUBE the rollers bearing too 3) ...
...belt does not move. If I step on the side the belt would then start to move until I move my foot. In order of most likely cause. 1) Worn motor belt needs to be changed. Rear roller bolts need to be ...
...belt to move away from that side. So if it's the left side of the belt that's moving close to the rail then tighten the left side and vise versa for right. Turn the unit on and set the speed to about ...
belt won't move I have tried the reset/off circuit breaker ....maybe I am not doing that right. DIsplays seem to work fine...I just ordered new keys from Sears for this 405E proform crosswalk...They ...
...belt first. If it moves and If it is a newer machine more than likely the motor sensor is telling the control board that the motor is not working and it is shutting down as a safety measure. If it ...
...treadmill. The belt i have a proform xp 550s treadmill. The belt won't move. The motor sounds good, and the console works, but the belt won't engage to move change drive belt proform xp 550s ...
479 questions posted
Usually answered in minutes!
56 Questions
48 Questions
44 Questions
33 Questions