Coleman Powermate Proforce 2500 Generator "gas oil stick" Questions

Ad

Question about Coleman Electrical Supplies

1 Answer

gas in oil. Whats the problem ? changed oil, new gas, had it running and checked oil and there is gas in it How old is the unit? Gas in the oil indicates sticking or broken piston rings. If it has sat

Ad

Question about Electrical Supplies

1 Answer

Gas in oil I have a Honda EM1800 Generator, I could start the engine for a few seconds and then the motor would spit a milky color substance through the Carb. I checked the float on the Carburetor no ...

Ad

Question about Watts Electrical Supplies

3 Answers

...oil in the gas. See the owners manual for details. If you look at the bottom there is a small dip stick which is uses to measure the LEVEL of OIL. This is the fill point as the engine uses only a ...

gas Generator pulsates during running and the lights in the house also. Also seems to be oil in the air cleaner area. I' have to shut it down after 10-12 hrs. to check the oil and most of the time add

...it back up with oil, and replaced spark plug. its getting gas, but no spark, is it the coil? There is a low oil sensor above fill stick. See if you can bypass it by taking the sensor out of the

Question about Honda Electrical Supplies

1 Answer

oil in the gas...first check for oil in the gas..Should show on the dip stick..if none or you can't detirmine change with new gas..the run for a while any oil residue will burn off and smoke clear..if

Question about Craftsman Electrical Supplies

1 Answer

...gas inthe oil...why? when i took out the dip stick the oil was gray and smelled like gas ...its only been used a few times your float is stuck and wont shut of the needle and seat so it floods make ...

...10HP gas engine and thus should have a dip stick where you add oil. Guess 10HP gas engine 1.0-1.5 qts?? You can always drain it and measure. Than add it back...Good Luck What is the full model

Question about Electrical Supplies

2 Answers

gas in oil gettin gas in oil what is wrong Worn or sticking piston rings, breather valve stuck. Is fuel pump mechanical? if so, check diaphragm for tear.

Not finding what you are looking for?
Coleman Powermate Proforce 2500 Generator Logo

73 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...