Coleman Powermate Proforce 2500 Generator "oil sparkplug" Questions

Ad

Question about Coleman Electrical Supplies

1 Answer

what to do if overfilled with oil generator was overfilled with oil drain the oil to the specified level and run the unit to clear any oil left where it shouldn't be then replace or clean your ...

Ad

...oil gets low. All that being ok give it full choke and it should start. Remove the sparkplug and check there is spark across the electrodes. (earth the thread part of plug on motor) If no spark ...

Ad

Question about Watts Electrical Supplies

1 Answer

...5mins quites restart and run about 5mins quites and won't restart (no fire at sparkplug) most of this generators have a shut off for low oil, so check your oil level to see if this is the ...

Question about Coleman Electrical Supplies

1 Answer

...need to know what kind of oil to use and replacement sparkplug we need to know the make of the motor....most use a SAE30 four stroke oil....not sure of the plug without knowing the make of

Question about Dewalt Electrical Supplies

1 Answer

...oil insite. tankfilter nozzle float chamber airfilter , sparkplug , ignition coil , electric field. electronic voltage regulator , a cilinder valve problem and many more . on/off switch dirth

I have a Coleman Pro-Gen 5000 with a Briggs and Stratton motor in it, I was wondering what kind of oil to use in it and what size sparkplugs I need 30W OIL, take old plug to store customer service ...

...oil first. Fill/top off if needed. Pull the sparkplug and turn the engine over. Does air pulse out of the spark plug hole ? (Don't get zapped by the plug wire.) If not, potentially a broken ...

Question about Briggs & Stratton Electrical Supplies

1 Answer

...day it starts, run smooth but no power to the panel. Any Idea. Does changing the sparkplug, oil etc. works? this gen is 6 months old? first volts come in out put wires or not may be its pannel ...

Question about Electrical Supplies

1 Answer

...would not pull at all. I removed the spark plug and tried to pull it but it still would not move. pour some gas/oil mixture down sparkplug hole and let it soak and see if the rings are carbon ...

can oil pressure switch be affected when rep;acing sparkplugs and wires on 1993 ford ranger 3.0 motor? car does not show any oil pressure after replacing plugs an d wires You probably knocked a wire ...

Not finding what you are looking for?
Coleman Powermate Proforce 2500 Generator Logo

73 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

John Trevino

Level 3 Expert

1420 Answers

Shawn DuRee

Level 3 Expert

356 Answers

Tim Garcia
Tim Garcia

Level 2 Expert

70 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...