Question about Whirlpool Washing Machines
Fills with water correctly, will not go to next cycle I have a whirlpool estate washer model TAWS800JQ1 that fills with water to correct level, but it will not advance to the next cycle. Hi ,, ok lets
Zanussi FLE1416W Front Loader When I set the programme, the START/PAUSE button blinks and nothing happens. The door light stays on as well. I have to switch off the machine before I can open the door ...
Question about Indesit Washing Machines
Indesit Washing Machine not proceedding with the cycle programme after filling with water. Hey there, my Indesit WIL123 machine fills with water at the start then just clicks and does not proceed with
Bosch Excell washing machine programme fault Hi I have a Bosch Excell 1400 Express (WFX2867GB/WFX2467GB) washing machine. It has suddenly started to not wash properly - it goes through the full cycle ...
I have a front loader model 850 (4.5 kg.).I select programme #5, load the machine and initiate wash cycle. Water is introduced for a few minutes but programme does not proceed. Machine remains stopped
bosch exxcel washing machine/dryer stops half way through programme Is it waiting to heat up? Try it on a spin cycle and see if it stops. If not, it may be a thermostat fault or heater element not ...
Question about Hotpoint Washing Machines
hotpoint bwm129 gets stuck mid cycle and dial does not move round I set programme going but it gets stuck on wash bit of cycle dial does not move it is stuck where it started. Originally started doing
Dryer only blowing cold air, washing cycle fine. My washer dryer Hoover HD8 244,is only blowing cold air on the drying programme, the washing machine programmes are fine. It stopped working after i ...
Please can you advise what the error code f13 means on hotpoint wdd960 washing machine? I have notived that it often happens on the drying cycle of the 60 minute quick wash dry programme. Is it safe ...
Question about Washing Machines
my family 1600 hoover 7kg load wont stop its cycle and has been running for 2 days!!!!!! I have unplugged it and switched it off but cannot seem to stop the cycle that has been going for two days! hi,
133 questions posted
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions