Polaris ATV "adjust cable throttle" Questions

...cable, new fuel pump and filter. I have cleaned out the throttle body best I can. Question edited to add maker. Question moved to the correct category 'make model'. Remove the throttle body and clean ...

...adjust the throttle cable by the little nuts in line up by throttle and for idle there should be a screw on side of carb up above the over flo screw (which is on the bottom of the bowl)it will be ...

the articles. Also check there is a little slack in the throttle cable and it isn't adjusted so tight that it operating the throttle. https://www.google.com/search?q=1999+honda+recon+adjust+tickover .

...low idle..and your idle screw is adjusted to low idke..meaning cable adjusted to lowest possible position when the throttle is released..then make your final adjustment using you idle screw..good ...

...in the throttle by loosening the locking pin on the cable, then pull the cable tight to remove the play and refix the locking nut. Once the play is removed adjust the jet so that its steady at

...adjust throttle cable? This will depend on how much you need to adjust it. Small amounts can be made using the cable sleeve adjusters. At each end of the cable sleeve is a nut shaped connector. If ...

Kawasaki prairie kvf 300 runs smooth but will not rev all the way up to full rpms. Check that the rev governor/throttle cable adjuster screw has not slipped out of adjustment (lock nut vibrated loose)

...cable with black knob to adjust. Old weather idle up or down has no effect. Any tips? make sure air conditioner is not on, sounds like choke is slightly on. check that upper butterfly is open all the ...

...adjust the cable until there is.- the next adjustment is at the top of the carb, where the cable goes in -- ....If this does not help, you may have pinched the throttle cable, or have an air leak or ...

idle is way too high, what is causing this, or how do i adjust idle? could be a problem with the throttle cable too tight adjust that and see what happens