RTO Image 15.0R Treadmill Walking Belt "incline mechanism" Questions

Ad

Question about Nordic Track Exercise & Fitness

2 Answers

...incline mechanism there is supposed to be a screw and a thick washer attached to the end. Over the course of time this small screw works it's way out (most likely stripping the threads of the small ...

Ad

Question about Sportsart Exercise & Fitness

1 Answer

error 7 my wrong maschin dont work when i turn kay hi sey error 7 and dont work nothing Incline calibration is necessary when: the display shows ERR7, the drive board incline error LED ( ...

Ad

Question about Sportsart Exercise & Fitness

1 Answer

...3000 treadmill problems I have a sportsart 3000 series treadmill, with an Error 7 message. The incline had stopped working but I was still able to use it. Now this Error appears and it will not ...

Horizon Elite 5.3 treadmill blows JP2 fuse. Incline does not work, all other functions work even with fuse blown. Does not blow if I disconnect incline motor. Called tech support they claim either ...

Question about HEALTHRIDER Exercise & Fitness

1 Answer

...incline position. How do i get it level again? Try putting the key in while holding the down incline button in. This resets the height mechanism. Repeat with the up incline button. Worked for

...mechanism is jammed? is it the motor or a sensor? Let the incline motor cycle. It is recalibrating. The incline will go all the way up then all the way down then double beep and reset. Your console ...

proform 860 treadmill, want to undo incline feature, & use it without it My Proform 860 treadmill is stuck in a fully raised incline position permanently. I am not mechanical, but was wondering ...

Question about Reebok Exercise & Fitness

1 Answer

...not move and the incline reads 0 on the display panel. This happened after the first workout on the machine! Make surt that there is nothing under the treadmill that could get caught in the

Question about Exercise & Fitness

2 Answers

...Check Fuse on MCB Err 7 on SportsArt Treadmill M# 6300 Either the main program IC didn't detect the incline VR voltage, or the incline VR voltage exceeds the range setting. Check the incline VR ...

Question about Exercise & Fitness

1 Answer

...Belts Motor Brushes SPORTSMITH net ERR7 Definition: The display board main IC didn't receive the incline variable resistor (VR) value, or the value exceeds the set range. Explanation: The incline ...

Not finding what you are looking for?
RTO Image 15.0R Treadmill Walking Belt Logo

81 questions posted

Ask a Question

Usually answered in minutes!

Top RTO Exercise & Fitness Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

153 Answers

Aron

Level 3 Expert

2586 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

Are you a RTO Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...