Question about Toshiba REGZA Televison & Video
...con board or by the screen itself. The only way to know is by replacing the T-con board. If they go away then it was the T-con board if they do not it's your screen that is bad. When changing the ...
...CON" board that is bad. This is the small board that the LDVS Cable goes to from the Video board and is mounted towards the top center on the back of the LCD Panel. It also could be caused by one of ...
...Con board is dead.This board sit right in the middle in the bottom of the LCD screen panel.This board is dead,require replacement.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-Con ...
...board problem or a t-con controller? any help would be great Thanks Hi luke To answer your question; You`d be looking at a t-con problem. Buffer/driver boards upper and lower are used in plasma tv`s ...
...con board, T-con board is a part of the panel, the part # is not available, but the Panel mode is LTA520HB0, part # 75011258 cost approx $3,210.13. If you need more information, please write it down ...
CON decoders board is dying,that why this problems are appearing.This T-CON decoders board it sit right on the middle bottom of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a
Question about Toshiba REGZA Televison & Video
...board.This T-CON decodering board sit at the bottom in the middle of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON decodering board for the
Question about Toshiba REGZA Televison & Video
...con board.This board is located at the top of the set in the center.You will have to remove the metal shield covering the board.Then you will see to flat cables connected to the board,one for each ...
Question about Toshiba REGZA Televison & Video
...try replacing the T-con board first. Most failures with lines appearing on the screen are caused by the T-con board. The Tcon board part number is:LJ94-02582B or 75014321 and you can find it
Question about Toshiba REGZA Televison & Video
...CON board or the main board, worst case will be the LCD panel, this will involve very in-depth troubleshooting since you do not have the T-CON or main board to try out so it will not be DIY repair, ...
27 questions posted
Usually answered in minutes!
264 Questions
245 Questions
228 Questions
112 Questions
77 Questions