Sharp AQUOS LC-32D44U 32 in. LCD TV "tv power supply issues" Questions

...TV power supply repair kits for Sharp Aquos and you will find repair kits and information on the power supplies. If this was helpful a vote on the thumbs up would be greatly appreciated for the free ...

...TV not to power on...... All these can be checked on the power supply board....... But more often bad capacitors causes problem on the power supply board. I do not think the power board needs ...

...TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes from electric outlet to the ...

...TV not to power on. (Before you go any further, check the power wire/cord connected from the wall (plug) to the TV. This is to confirm if the power cord has not loosed contact from the wall.) All ...

...power button on the tv has no effect. The only short-term fix I've found is to unplug the tv and plug it back in. I'm hoping this is an easy fix because it's a particularly frustrating problem with a ...

tv and kill ur tv power supply board.That the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish power supply board for the replacement

...tv powers on showing the blue light which flashes for 4 seconds then turns off its followed by the red light which starts blinking for 2 seconds pauses and then repeats. I already changed the t-con ...

...TV red light blink once I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main fuse, standby power supply and any signs of ...

...TV can have numerous diff power supply models from revisions and improvements. If you replace the board make sure you look match serial numbers on board to the new board. The back of the TV will come ...

...power button on top of the tv (not the remote) and most of the time it will come on and work. I am going to try to replace my power supply and see if that fixes the issue. If so, I will update this ...