Polaris 2012 Ranger 500 EFI "idle" Questions

polaris ranger 500 efi 4x4 2012: will not idle when first starting up. I have to give it gas to get it moving. once it warms up it is fine. any thoughts? Sounds like the jets are cloged up you will ...

...open up and after it g hot t will run ood when I first get on my ranger and start it it will not idle and take fuel, when you try drive it it ack like it is running out of fuel, you can set and ...

continuous high idle and idle screw no help Have a 2007 artic cat atv 400 4by 4 automatic, Has continuous high idle and idle screw doesn't help. These atvs wont shift properly at high idle and so this

How to adjust idle on a trx450r its idling low and wants to die, Hi, You adjust the idle screw on the carburetor, to do this you will need to run the ATV, rev it and tweak the idle and throttle screws

clutch stays engaged at idle Have to turn bike off to be able to change gears Warm the engine up then turn the idle speed down as low as possible to see if it will go into gear. If turning the idle ...

how can I adjust idle system? ATV Carburetor Idle Adjustment Fix - YouTube ? 1:27 www.youtube.com/watch?v=Xlagflm4ka0 Oct 28, 2012 - Uploaded by StopDropNRun GIO Rebel t3 200cc Quad ATV Carburetor ...

2010 Yamaha Grizzly 350 won't idle. will run but idle has to be left on Sounds like your idle/slow speed carb circuit is plugged. A carb cleaning and spraying all passageways with aerosol carb cleaner

idle adjustment. idles too fast and will not shift statst ok and runs ok otherwise. The idle adjustment screw on the carburetor usually has a spring on the shaft. Turn it counterclockwise to lower the

2003 Ozark 250. Adjust the idle but after riding a few minutes it goes back to high idle/rpm. Re-adjust back to normal idle but then again after a few minutes of riding it starts idling high again. ? ...

I have a Kymco Mongoose 90 that will not idle when the motor is warmed up. It will idle when the engine is cool, but not when it is warmed up. I have tried the idle screw, and it does not affect the ...