GE WSXH208A Front Load Washer "overloaded washing machine stopped" Questions

Ad

Question about Samsung Washing Machines

1 Answer

...Washing Machine error codes at: http://www.keepingupappliances.com/repair-help/appliance-repair/washing-machine-help/samsung-washing-machine-error-codes/ or ...

Ad

...washing machine model WA13513 13.5kg load had 8E error message popping out from the screen. Is the computer board damaged? OVER CURRENT ERROR ? Display shows 8E. IPM fault signal (this is caused by ...

Ad

...Washing Machine. Stops with the following lights flashing 7 times; -Remaining Time Indicator (90) and -Cold Wash button. Does anyone have access to any resources which would explain this error code? ...

Question about Whirlpool Washing Machines

2 Answers

...washing machine produced a burning rubber smell and then stopped working. After 7 hours, The machine was able to work again in proper working order. Is this because it was overworked? The motor could ...

Question about Washing Machines

1 Answer

washing machine model no Q1233 (C/S/V) error code E8. Any advice please 8E - OVER CURRENT ERROR IPM fault signal (this is caused by the overload of the MICOM INTO during motor action). IPM: Integrated

Question about LG Washing Machines

2 Answers

...overloaded; put in clothes within machine's capacity. What is written in your manual's max clothes capacity. If your heater is on; switch off machine and wall plug. Reset the machine with the heater ...

Question about Dyson Washing Machines

1 Answer

...by tight drum halves when in contrarotation mode the motors are being overloaded a call to dyson to turn off contrarotation will stop the fault by locking the drums together as a normal washing ...

...washing. Should take about 50 minutes for a wash, but takes only 14 minutes, goes into wash for a little bit, after the fill, and then goes into drain, and spins a little bit, and then oL... Any help ...

...washing machine starts both drain cycles (AFTER WASHING AND THEN AFTER RINSING), it will work for about 10 seconds then it stops due to the overload switch (?)switching the machine off. After ...

Overloaded washer Samsung vrt top loader. Is there any way to reset the machine Try unplugging the machine for 5 minutes, and stop overloading it or you will destroy it very quickly.

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

1,215 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Virgil Watts

Level 2 Expert

267 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...