...replace one of the tub "paddles on the inside because a part5 of it borke off, is it possible that is is rattling around insode the tub? It is possibly part of one of the paddles , but it may be drum ...
Question about Asko Washing Machines
...replace drum paddle lifter. BIG JOB !! The machine will have to be fully stripped down as the only access to the paddle is by removal of the spin bowl itself from the machine. The paddles usually are ...
replace tub seal how does paddle adjater come out of tub Use a flat blade screw driver and pry the top off of the center. There will be a 1"2 bolt down inside the center. Loosen and then pull straight
Question about Kenmore Washing Machines
...replace-the-bearings-on-a-washing-mach.html It sounds as if the tub may be lodged in off balance mode causing alarm to buzz , check tub for centering as well as should be a paddle or hard wire near ...
Question about GE Washing Machines
...replace both shocks if worn. Remove power from the appliance before attempting this repair. Some models of top-load washers use tub dampening straps to cushion the movement of the tub during the spin ...
...tub and pick up greasy marks. Check for play in the drum by lifting it up and down from the front. It should only lift up a mm or so. Then turn the drum so that one of the drum paddles is at the ...
...paddle arrangement in the machine tub. You can check this by removing the screw or bolt that holds the "agitator" in place. You do this with the machine filled with water with no soap and no apparel ...
...paddle on over to the PC to ask this question. Our 80 series (7-8 years old) has twice in the past year not stopped filling the washer and what results is a flood!!! the first time it happened we ...
...paddle assembly onthe bottom did function normally. Now, the machine will not spin. Placing the unit in the spin mode, one can see the basket "trying" to move, but the trans seems to be engaged yet, ...
Question about Zanussi Washing Machines
...replace the drum paddle on my zanussi zwf16070w1 Insert a screwdriver into the fourth hole in the lifter (paddle) and bend back the anchor tabs. Pull the lifter outwards (towards the door) and detach ...
1,215 questions posted
Usually answered in minutes!
992 Questions
371 Questions
398 Questions
323 Questions
255 Questions