GE WSXH208A Front Load Washer "standing water under drum" Questions

I have standing water under the washer drum its normal and nothing to worry about..

...water. If the filter is clean you should then check your pipe coming out from under the tub. Last check your outlet pump, could be blocked with something. Refit carefully, you might need a nice pair ...

water left in the drum. not a very normal condition you have here,lets try removing hte back cover, behind there on the lower left of the drum youll see a small black rubber hose leading from the top

water standing in the drum. How can I reset this? Hello Buvamo, You may want to check the water valve and make sure it is all the way up where the intake line is. The other area to check for water not

...water is in the drum. Frequently the problem is dirt clogging the air tube. This debris might move out of the air tube if you blow into it. Other possible causes are that the inlet valve is not be ...

...under you will find the outlet pipe runing to the pump then another hose going from the pump to the bottom of the drum. if you disconnect the hose from the bottom of the drum you will find the filter ...

...SHOULD BE STANDING STILL WHEN THE WATER POURS IN. CAN I RESET THE MEMORY??? HOW??? Should still be under-warrenty check with your local service agent first please advise if you need any further ...

water. Make sure that the drum is standing in the middle of the machine and then adjust the machine until the water is at the same level all around at the nearest set of holes to the water. Check that

standing water (couple of ounces). took off drain hose, checks ok ,no leaks under pressure. took both hoses off pump no clogs. ran the washer with water only, no leaks from hoses. but after spin cycle