GE WSXH208A Front Load Washer "stop water rinse" Questions

Ad

...rinse. and can't get hot water. The washer fills just fine, spins just fine, drains just fine. Stops at the rinse cycle and won't continue. the clothes appear rinsed and spun but the dial still shows ...

Ad

...water valve will stop letting cold water into the washer; therefore, once the washer gets to rinse it will either stop or not do anything during the whole rinse cycle. This is because when you ...

Ad

Question about Kenmore Washing Machines

1 Answer

...water, but rinse cycle not working. Washer stops at rinse cycle after draining wash water and tumbling a couple of times, and makes humming noise. Dial does not advance after this. Washer spins fine ...

Question about Whirlpool Washing Machines

1 Answer

...rinse in cold water only, some have a choice. If your washer rinses in cold only, then the valve for cold water is turned off, or the solenoid that allows cold water to flow in is not opening like it ...

Question about Frigidaire Washing Machines

1 Answer

...flow problem, at the back of the washer where you hook up the water there is a small in line screen to stop debris from water supply. I removed them, they were clogged, cleaned them up, works

Question about Whirlpool Washing Machines

1 Answer

stop at end of cycle and does an extra rinse. when it does extra rinse water is real slow to fill. The extra rinse is not wanted. Turn off extra rinse switch or pull wire going to it. If water is slow

Question about Whirlpool Washing Machines

1 Answer

...washer. Remove the hoses from the valve at the rear of the washer and clean the trash out of the filter screen. You have a cold fill rinse washer. If it can't get water it stops advancing the

...stop bottom and start bottom tries to start but not work if you're saying it dies in the rinse cycle you could have a problem with your cold water not coming into the washer,the washer only uses cold ...

Question about Amana Washing Machines

1 Answer

...water valve will stop letting cold water into the washer; therefore, once the washer gets to rinse it will either stop or not do anything during the whole rinse cycle. This is because when you ...

water manually from the drum after trying an empty 90 wash and rinse cycle (both stopped on the Spin and flashed). Any ideas? Thanks. x Washing machine stops at the spin cycle - light flashes. Have to

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

1,215 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

geapptech

Level 2 Expert

157 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...