GE WWSE5200B Top Load Washer "sump pump impeller spinning" Questions

Ad

Question about Frigidaire Washing Machines

1 Answer

pump its probably at the rear it may have a rubber sump under it feel for things ie squeeze the sump often ladies bra wirings escape the drum and end up in the sump and jam the impeller its no big job

Ad

Question about Washing Machines

1 Answer

...sump hose or the drain pump. Then check the pump impeller turns ok. It should ping round in stages. If its stiff to turn then the pump is faulty and will need to be replaced. Then retry machine and ...

Ad

Question about Samsung Washing Machines

1 Answer

...sump hose and pump. The continued leek surgests that the leak is from one of these parts, most likely the pump impeller seal has gone and the only remedy for this is a new pump. You can check this by ...

Question about GE Washing Machines

1 Answer

...pump clog we would start at the Sump Cap disconnect the drain line from it and inspect the Sump Cap for debris. We would have to check if the input hose is blocked or the impeller of the drain pump ...

...pump as mentions in the manual. I have simply drained it and check that there are no objects and that the impeller is moving. Any help will be gratefully received....kids coming home from uni very ...

Question about GE Washing Machines

1 Answer

...pump to the drain pipe. The sump cap is sort of semi transparent if you shine a flash light on it do you see any restrictions? I had half of a bank card stuck in mine. This the sump cap item 9 of the ...

Question about GE Washing Machines

1 Answer

...pump from sump hose and check for obstruction in either item. Pump removal: power off, remove cover, locate pump, (attached to other end of drain pipe).undo 2 wiring connections, 2 hose connections, ...

...sump or drain hoses, but they seemed fine. Spun the pump impeller and it spun freely and quiet. Also noticed that the drain pump is electrical and not belt driven. Could it be that the drain pump ...

...pump might be plugged or has failed because of wear or winding issues. Check the sump area and there are parts and diagrams here: ...

Question about GE Washing Machines

3 Answers

Sump Cap to Drain Pump inlet, the drain pump and Drain pump discharge line are working OK. You could tear down the Drain Line system from Sump Cap to exit pipe. But you report no standing water in the

Not finding what you are looking for?
GE WWSE5200B Top Load Washer Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Virgil Watts

Level 2 Expert

267 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...