...remove back cover on bernina 830 record How to remove sppol pin cover .... there is no back cover - it is part of the metal frame 'housing'. You can remove the base, the top cover, the end cover ...
Question about Singer Sewing Machines
...cover. Remove the screws that hold the front cover in place and remove the front cover. Remove the screws that hold the side cover in place and remove the side cover. You should now be able to access ...
Question about Bernina Sewing Machines
cover. Loosen the 5mm Allen socket head screw below the step pulley to relieve the belt tension. Remove the lower motor belt. Lift the step pulley and slide off the hand-wheel, (assuming that you have
...get at screws for the front cover. Typically there are 5 screws on the back cover that have to be removed and 2 in the bottom of the base. Note that the front and back covers "snap" together and ...
Question about Singer Sewing Machines
...remove the cover of the Singer model 117 Featherweight II sewing machine: Referring to the diagram below: 1.Remove the face plate by removing the single screw fastening it to the left end of the ...
Question about Bernina Sewing Machines
...remove end cover from bernina 830 record (handwheel end) There is one screw on the bottom of the machine in the center of the handwheel end. Remove this screw fully. Then the cover should come off ...
Question about Singer Sewing Machines
remove Top Cover of Singer 6215 Sewing machine: Similar to Singer CG 590 and other similar sewing machines that use sliding stitch-adjustment levers that pass through slots in cover. It takes a lot of
Question about Singer Sewing Machines
...remove cover from Singer sewing machine 384? Generally, there is a separate cover over the thread path, and it's designed to be removed by the user for cleaning, removing thread ends and jams. It's ...
...remove the plastic cover off to get to the presser bar? i poped the plastic covers on the back of the machine to expose the screws and unscrewed them. prying off the plastic cover was harder: the ...
...remove the top cover to attach a new spool pin because the original one broke off when the machine was being transported (it fell over). Many are held in place only by spring clips and can be removed ...
132 questions posted
Usually answered in minutes!
28 Questions
8 Questions
1 Questions
561 Questions
80 Questions