Juki MO-644D Mechanical Sewing Machine "bobbin moing" Questions

...in shipping? try tightening the han wheel clutch right end of machine Sounds like you have the bobbin winder activated. That is a safety feature that prevents the needle from stitching while ...

juki 5530 straight stitch industrial machine bobbin thread breaks while sewing. Thread gets stuck in bobbin case and does not move,then breaks. the wheel that turns the belt sometimes has a very tight

...thred its not getting the thred. so its not sewing the problem of your juki sewing machine is your bobbin. adjust your bobbin to the right

...machines. Only one part of the machine needs to be oiled from time to time, the track around the bobbin. One drop of oil should keep her from snagging and breaking. If that doesn't do it for you ...

My bobbin winder on my 1978 Bernina record electronic machine won't turn and wind the bobbin try this link... http://www.sewusa.com/Sewing_Machine_Repair/Sewing%20Machine%20Troubleshooting.htm ..or ...

...sets the lower thread tension (upper thread is what you see on the underside of the fabric). Bobbin tension is for the thread you see on the top of the fabric you set lower stich from upper ...

...the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are ...

...YOU HAVE THE RIGHT NEEDLE FOR THE THREAD YOU ARE USING, AND THAT THE SAME THREAD IS ALSO IN THE BOBBIN. CHECK UPPER TENSION, BY PULLING SLIGHTLY, IF IT'S TIGHT, LOOSEN THE UPPER TENSION.YOUR ...

...bottom of the work reflect upper thread tension problem, while top stitches are a problem of the bobbin tension( FOR THE MOST

...it with minimal instructions. It seems to basicaly work, but won't pick up the thread from the bobbin. Any ideas, or where I can get a manual? Greg Loopers are probably out of time. I'd suggest ...