Question about IBM Office Equipment & Supplies
...spacebar, keys, nothing. monitor is missing and already tried turning machine off and on, plus unplugged...no change Remove the batteries and unplug for 30 seconds plug in and test. Unpluging and ...
...Remove it and check for debris under it. DickyO Have you spilled anything on the keyboard? Raise the unit up on its back and see if there are any little pieces of round plastic bits missing from the ...
Question about Brother Office Equipment & Supplies
...spacebar. Open lid, remove black ribbon and old correction tape. Gently pull new tape apart a few inches. attach take-up spool (empty one) to right post. Pass through right ribbon guide, sticky side ...
spacebar and top cover and pull towards the front and up. Tilt the top cover up from the front to back to remove. Remove the 2 screws that secure the power supply unit and lift from center-to left and
Question about Brother Office Equipment & Supplies
...spacebar or backspace to move the carrier to the center of the platen. 2. Open the top cover. 3. remove the cassette ribbon if installed. 4. Pull off both spools, pressing against the correction tape ...
SPACEBAR or BACKSPACE to move the carrier to the center of the typewriter, then turn off the typewriter and unplug the unit from the AC outlet. 2. Open the Top Cover and remove the cassette ribbon, if
Question about Office Equipment & Supplies
...Spacebar when touched for one space often fires away as though it is being held down. Am technically competent - could this be a DIY fix? Remove the R. black duat cover. Get some WD40 and spray the ...
...spacebar with the "X" printed on it is the correction button. You just place the carrier on the character to the right of the wrong one and hit the corr. button. The carrier should automatically back ...
441 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions