Question about Brother Office Equipment & Supplies
...TYPING RANDOM LETTERS AND SYMBOLS I INSTALLED DAISY WHEEL (PROPERLY) AND DID CODE + RESET ON TYPEWRITER TO RESET AND WHEN I TYPE THE LETTERS AND NUMBERS ARE NOT THE SAME AS WHAT I TYPE. I HAVE A ...
...typing correct letters I have hit "Reset" and "Code" to reset the carrier, however that only works for a few letters and then it begins typing the wrong letters again. Major fault. Daisy-wheel sensor ...
typing "code" and "reset" sets it right to type there is a release lever on the right side of ribbon carriage, release, then remove dasiy wheel, check for damage, then re-insert it and lock it back in
Question about IBM Office Equipment & Supplies
...all codes in the typewriter? It beeps constantly and skips while typing. Try this turn it off remove the batteries, wait 30 sec. turn on all settings will go to default. MEMORY WILL BE CLEARED!! ...
...reset tab may be out of alignment. I would Power it off and then turn it back on and test to again. If it's still typing the wrong or unreadable letters then turn off the power, open the lid. On the ...
Question about Brother Office Equipment & Supplies
The keys will not type the letters they are labeled with. When I press the letter "e" for example, a comma is typed. If I take out the cartridge, and put it back in, and reset the machine; the machine
...typing the wrong letters, make sure the keyboard is set to english, hold down code key and keyboard key together. Good luck! Just had this same problem. I had to reseat the daisy wheel about three ...
Question about Brother Office Equipment & Supplies
My granddaughter hit a bunch of keys on the typewriter. When I went to type something now I get a bunch of gibberish. I can type a and get an "a", but when then I get wierd characters when I type ...
Random letters/correction tape I put in a correction tape and ever since the typewriter types random letters. I have tried code & reset and I still can not get it to type properly. I read that I ...
Question about Brother Office Equipment & Supplies
...some factory reset and fixed the problem. My Brother ML100 typewriter was dropped to make it seemingly unusable. It was typing whatever it wanted to. Hope this helps whoever still uses a
441 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions
