...replacement could be done.I've included picture of both DVD mechanism alongwith laser pickup unit, and idle laser pickup unit here. It will be best to replace the unit with its
Question about Symphonic Televison & Video
...and to replace it, mechanism as a whole should be dismandled out. If this does not help, replace the Laser Picup Unit, and its strip wire, which goes to the main board from Laser Picckup unit.
Question about Toshiba Televison & Video
...light and receives light .. it also has an automatic alignment mechanism as part of the "laser" assembly .. you have to replace that entire thing as a unit .. you cant just replace the laser ..
laser unit is clearly visible to you and completely from under the spinning mechanism. 7. Since the lens was clearly visible now, and easily accessable, I carefully and lightly cleaned the lens with a
...replace the laser to a brand new one. To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a ...
...replace the laser to a brand new one. To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a ...
...replace the laser to a brand new one. To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a ...
...replace the laser to a brand new one. To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a ...
...replace the mechanism or at least the laser lens carriage assembly. A possible workaround is to clean the traverse drive / mechanism. A can of compressed air may be used to remove accumulated dust ...
257 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions