...back in pump and run it and see if it drains,if not check the pump again,if it's clear change out the pump,usually you'll find coins,toothpicks,bobby pins and other good stuff in there,hope this ...
...39;T EMPTY THEIR POCKETS! (i see this quite often infact did this morning) chances r u eitha have a bobby pin jammed in the pump propellor or a 20 cent coin acting as a butterfly valve in the tubing ...
Question about Kenmore Elite Washing Machines
...bobby pins and other laundry debris. Remove the filter grating and clean that thing with hot water until it's white again. I squirted some anti-mildew agent inside and let it air out ...
Question about Kenmore Elite Washing Machines
...machine back on this should unlock the door.there may be something blocking the drain pump such as a small nail bobby pin tooth pick etc.etc.this hould help. let me know how things work The F70 and ...
...bobby pin), drained all the hoses, removed the hose from the tub to the pump, removed the drain sensor, removed the pump itself and cleaned and examined it all, then reassembled. A few loads washed ...
Question about Whirlpool Washing Machines
...bobby pin in this housing and are trying to determine if this made the hole or if the hole is suppo Machine was making a very loud buzzing during spin and rinse cycle. Then we noticed water leaking. ...
...bobby pin. when machine is on spin cycle only the pump opperates. does not spin at all. please help If there is no water in washer, and it will not spin, I suggest you remove the motor, and check the ...
...we'd be out big money we don't have right now and instead we gained $.96 - and a whole lot of bobby pins! The advice was great. now all you have to do is find a few london bobbys to give them to ...
I think I have a bobby pin in my washer. It clicks when it agitates. How can I get into the drum to find if there is one? I doubt that it's a bobby pin. The noise more than likely comes from the belt.
Bobby pin is stuck under agitator in a front load machine Removed agitator cover by taking out one screw buy pin is still stuck under paddle. you might have to take it off
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions
