...clothes dryer. Thermal Fuse Another possible cause for a dryer not heating up could be attributedto a faulty thermal fuse. Once a dryer's thermal fuse has blown, it isno longer of any use. If your ...
...much but you can smell it! So get the clothes in to the dryer immediately. You'll want to relaunder the smelly clothing after you have cleaned the washer. Good luck to you and Thank You using FiX
dryer, but having to buy all new clothes is not any cheaper either. Does anyone have ANY IDEA of what else could be wrong??? PLEASE HELP!!?? sounds to me like you have a venting problem or the vent is
Question about Kenmore Elite Washing Machines
...dryer that appears to be very hot, but the clothes take longer times than usual to dry. If left in this condition, the heating circuits will eventually fail. If you have any questions, or require ...
...making very small holes in my clothes. it has to be the washer because i put a brand new shirt in the washer but not in the dryer. this has happened several times during the last 3 months are so. run ...
...clothes by hand b4 putting in the maching dryer. To verify my suspicion, it will be necessary to pull the machine out from the wall and remove the lower panel which is normally only a half-dozen ...
Question about Kenmore Elite Washing Machines
...clothes get very gray in the under-arm area. I wonder if there is just not enough water to break down the aluminum in deodorant or something. It is terrible to have this expensive washer/dryer and ...
Question about Kenmore Elite Washing Machines
making. It is just not spinning. It drains the water out but does not continue to spin. Used to do it only occasionally but now it does it all the time at the end of all cycles. Used to get it to spin
Question about Kenmore Elite Washing Machines
...dryer I reloaded the washer with some towels to run a load. During the spin cycle I noticed the washer was really making a lot of noise, could hear it coming from the basement, something I usually do ...
Question about Kenmore Elite Washing Machines
...making his own repairs for about 50 years. So the machine ID doesn't mean much to me. I came to fixya looking for a schematic for an really old AM/FM radio and just happened to see that more than ...
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions