Kenmore Elite 45986 Front Load Washer "odor 3 washing" Questions

...odor removal products on the market and they don't seem to work very well. How old is your machine? Mine is 5 years old, and I just started to get a "sewage" smell in my laundry room this weekend. I ...

odor like mold. Any suggestions on how to get rid of it? I obviously have washed with the recommended amounts of detergent, but The smell remains! Run a cycle ,no clothes in, with about 3 cups/ 750 ml

...odor of sewer gas. Otherwise, the washer works fine.. IMPORTANT: Read thoroughly. DO NOT add detergent or other laundry products to this cycle. 1. Remove all items from the washer. 2. Open the ...

...washing each load with at least 1/2 cup of borox in the washer itself. Just throw it in w/ the cloths.I would not recommend putting it in the dispenser with the HE detergent. Also, leave door open ...

...odor. We have followed directions in the manual and the problem persists. We removed the front panel of the machine and cleaned the white tube that was filled with "gunk," removed and washed the ...

...to allow the drum to air out. The water will not evaporate, but it will help reduce the build up of odors, mold and mildew. Now...if your washer is slowly accumulating water in the wash basket area ...

3 tablespoons of Cascade or Electrosol dish detergent poured straight into the soap dispenser. Enzymes in the detergent eat up the scum and the pumice in the dish detegent scrapes off the residue that

...consumers seal the standpipe in the belief that this will prevent overflows, or get rid of drain odors. This often creates more problems than solutions. DO NOT place the drain hose too far down ...

3. The control board is faulty. Call in a service man, pay $a lot, he will order the boatd, wait 2 more weeks so he can get it, let him install it, pay $a lot, use only HE detergent, or else this will

3. With the top panel removed, disconnect the dispenser hose(s) and electrical connections to the valve. 4. Remove any mounting screws holding the valve in place and reinstall with a replacement valve