Kenmore Elite 45986 Front Load Washer "washing machine fuse location" Questions

washing machine The problem I am having is: Can not get the washer to open error code DLF ( which is door lock fail).. Will not even start nor does the door lock even light up on the control panel.. I

Dryer is not heating up Hi I believe that everything else is fine rather it is the thermal fuse that is located inside the rear panel to the exhaust duct that is bad and should be replaced. If you ...

Washing Machine I have a Kenmore ELite 21086 Washing Machine and it abruptly will not even turn on now. The power cord is not loose, I have checked the breaker and plug, and pressed every button on it

...the wiring must be repaired or replaced. 2. Lid switch The washing machine may not function if the lid switch is defective. The switch is usually located near the door. Replace if found

...washing machine won't start, begin by looking at the power source. First of all, is the washing machine plugged in? If it is, has it tripped a circuit breaker or blown a fuse? Check and reset the ...

has a E1 code Dryer shuts off and has a E1 code. If I remember correctly that means the thermistor is shorted or open on a Kenmore elite model. You can take off that bottom front panel and should find

Kenmore HE 5 electric dryer, no power I have a Kenmore HE5 electric dryer that is 5 years old. It has worked well but now it is completly dead. I have power to the unit (to where the power cord ...

Dryer will not heat up, why? Hello there There are several reasons why a dryer will not heat up i will do my best to explain them and i will add some links that you can use to help you out ok ? If ...

...machine has no power, and the door is locked. I have checked the circuit breaker and the electrical outlet. Since there is no power, there are no codes to look at either. I don't know where an ...