Kenmore 3.8 cu. ft. HE4t Front Load Washer "door lock number" Questions

Ad

Question about Maytag Washing Machines

1 Answer

...door lock system. The machine has a safety feature that prevents the high-speed spin cycle to commence unless the machine control detects the door is locked through the door lock switch. Check if the ...

Ad

Question about Frigidaire Washing Machines

1 Answer

door lock before allowing to fill,start unit and listen for the door lock system, if the lack fail to either sense the door or the prongs on the door are broken, this will happen. Part number for door

Ad

Question about Kenmore Washing Machines

1 Answer

door lock assembly checked to determine the cause of the failure. If the door latch needs replaced there are 2 available depending on the serial number. Part number 22003593 price $65.86 is for series

Question about Frigidaire Washing Machines

1 Answer

...door lock and switch assembly. Remove the screws securing the door lock and switch assembly to the front panel then pull the door lock and switch assembly out. Transfer the wires to the new door lock ...

Question about Washing Machines

1 Answer

...DOOR LOCK ERROR A Door Lock Error occurs if the door cannot be locked. It will tryto lock it six times before displaying the error code. Possible Causes/Procedure ■ Door lock mechanism is ...

...door lock/switch assembly on the right side of the door opening is faulty. It is recommended to replace both parts when one is faulty or worn. The door lock/switch assembly is part number 1094190 and ...

...door lock on my hotpoint washing machine and it wont lock, and therefore wont start washing IF YOU HAVE REPLACED THE DOOR LOCK BE SURE THAT THERE ARE NO LOOSE CONNECTIONS OR BURNED WIRES THAT GO TO ...

door lock is plastic if it.s the inner door lock catch, that attached to the front door handle yes it can be replaced, take photo and model number of machine order from washing machine repair shop. or

inside of the door If this fails to work you most probably have a fault with the main board not recognising the door lock. For reconditioned modules and mother boards you can goto http://emwelec.co.uk

...Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times before displaying the error. Potential Causes ? Door Lock Mechanism broken or removed from the Door ? Check Door ...

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE4t Front Load Washer Logo

170 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...