...pressure condition for machine to start operation ??? Thank You very much for your time and efforts Michael no,hot water connection is not the problem.the problem is of the machinery as it must have ...
...pressure especially on hot, or you will find the hot water trickles into the machine when damanding hot water. I use a seperate pump for the hot, the pump is connected to the hot valve supply and ...
...Wash machine. The cold water fill starts flowing normally and within 1 min or 2 the cold water slows to a trickle. If I turn the machine off and back on, it flows normally and then slows again. I ...
hot and cold water are open and not reversed. if unit overfilled and flooded garage, the is if with you pressure switch or pressure hose. remove to lid of machine and you will find pressure switch and
...pressure switch on. If this happens, when you put the washing machine onto a wash program it doesn't take any water in and starts washing because it thinks there is water inside. This fault should ...
Question about Washing Machines
wash in cold water. You may need to use a Y adapter to feed pressure to both inlets to get the machine to fill. If it senses no pressure on one inlet it wont fill. You can run both inlets to on source
...start a program. The washe level is below the door glass. the rinse level comes up 3 cm on the glass. The washer is designed to be water efficent. If you are not getting water this high, look at the ...
Question about Kenmore Washing Machines
...wash. The HF error is HOT FLOW so it is not seeing any hot water pressure. The actual temperature should not be an issue. Also if you have too much water pressure you wont see the bubbles. If that ...
Question about Kenmore Washing Machines
pressure switch while it is in the wash mode filling with water and if it starts washing the diaphfram is good if not its faulty. u can also checl the water inlet valve the one with the hoses attached
...wash cycle and start the machine this should bring hot water into the machine and you will know within a few minutes if the hot water supply is working or not, and to find out if the cold supply is ...
170 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions