Kenmore 3.8 cu. ft. HE4t Front Load Washer "standing water loading wash" Questions


...water in the drawer. That's what I thought was wrong with mine to I had 1.75 in change and a piece of a wash clothe in the screen. I toke all that out and it still leaked. Took it apart further ...


standing water inside whirlpool duet front load washer model WEW9200SQ02 gets standing water inside between loads? why? and how do you fix? take off bottom panel of washer. unscrew front plug to drain


...standing water but the clothes inside was about as wet as it can be. Any other idea what may be wrong? Maybe the pump is not turning on during the spin cycle? Pump out time of 40 seconds sounds good. ...

Question about Kenmore Washing Machines

1 Answer

...standing water I also have standing water after a wash cycle, but not immediately after. Given the history of very expensive repairs to this Kenmore HE4T washing machine, I suggest you do what I do, ...

Question about Electrolux Washing Machines

1 Answer

standing water. The reduction in odor, will occur quickly and dramatically. My second tip is to run the washer empty for a quick rinse cycle. Add an entire cup of bleach at the start of the cycle. The

Question about Maytag Washing Machines

1 Answer

water runs and automatically drains out. It started doing this only on rinse, but now on wash also. the number one cause of this is your drain hose is too far down in the stand pipe or too low beneath

...standing water and mold inside of door gasket mold builds up in door gasket, where there is always standing water. I dry it out, clean the gasket the best I can. There is also black stuff building up ...

Question about LG Washing Machines

2 Answers

...wash the clothes. As the water flows in, it flows right out again. Thanks, J Sounds like your stand-pipe has fell over,located behind machine that the drain hose goes into.This pipe must be ...

Question about Frigidaire Washing Machines

1 Answer

What size drain stand pipe should be used? Water is backing up from the drain. Machine is working great but water over flowing at the stand pipe The problem is being caused because there is a blockage

Standing water in the washer hours after wash cycle completes Sometimes there is standing water in the washer, a few hours after a wash cycle, but the washer seems to be draining and spinning fine. I ...

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE4t Front Load Washer Logo

170 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts


Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides