washing machine drum wont spin or turn by hand If you cannot turn the drum by hand, then the main drum bearings have probably seized up, or there is something stuck between the inner and outer drum.
...drum and inner drum. Please advice procedure to remove drums from each other. Instead of all thet troubel try running a hot 90 degree wash with epsom salts. Then do another 90 degree wash with ...
...inner drum bearing lip-seal has gone bad and the inner drum bearings are now water soaked and rusted and need replacement,parts are cheap,but depending how long it takes to remove and clean the ...
Question about Kenmore Washing Machines
...cover including the door then remove the inner drum pulley and belt and then split the outer tub to clean out old detergent and fabric softener if you use this as this is where the smell is coming ...
...(maybe) 3. Broken spyder-the Inner drum part that holds the drum to the hub(kinda likely). If inner drum can be moved without outer tub also moving in tandem, then broken spyder is likely. Good ...
...inner stainless drum up and down any significant amount? If so the bearings are most likely shot. If its pretty solid but the outer plastic tub moves, its most likely a suspension issue. You can take ...
...inner drum is loose and floppy.if it is, it's likely the bearings have collapsed, and require replacement...If the drum feels stiff and tight, it could be that something is jammed between the inner ...
Question about Samsung Washing Machines
...inner drum moves very very slow you can see it wants to spin but it looks as if there is something holding the drum not to spin. check underneath for a solenoid that engages a lever or clutch to ...
Question about LG Washing Machines
...drum wont spin when on spin cycle , just makes loud ratcheting noises I would guess your "spyder" is corroded out That's the part that holds the inner tub to the hub that the tub rotates on. See if ...
...920 drum wont turn Drum makes noise and will not turn Something caught between inner & outer bowl. Nail or screw caught in inner bowl. Main bearing seized, replace seal &
338 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
